RO-3301 Ceramic Pipe and Elbow - Rottech
PRODUCTS SERVICES
QUALITY CONTROL
  • QA & QC
  • MANUFACTURING
  • Tel: +86 21 51383430
    Fax: +86 21 51383423
    Cell phone:+86 13621697720
    Email:rottech@rottech-asia.com

    RO-3300, Ceramic / PFA lined Pipe

    Home » PRODUCTS SERVICES » PIPE & FITTING » RO-3300, Ceramic / PFA lined Pipe

    RO-3301, Ceramic Pipe and Eibow

       

    Since ceramics have excellent hardness and strength, Rottech developes ceramic lined Pipe and Elbows. which are widely used in many highly corrosive and abrasive transmission systems especially for coal fired power plants, steel plants, mining, chemical industry, petro-chemical, polysilicon and metallurgy.All  of Rottech ceramic-lined pipe and fittings feature extremely wear resistant ceramics that are also exceptionally corrosion-resistant.

    Rottech elbows are available in short or long variants and varying sizes:
    Long Radius (LR) Elbow: Radius is 5D or more (5x the diameter of the pipe)
    • Long Radius 45°Elbow: Changes pipe direction by 45 degrees
    • Long Radius 90°Elbow: Changes pipe direction by 90 degrees
    • Long Radius 180°Elbow: 180 degree return bend allows complete flow reversal
    • Short Radius 45°Elbow: Changes pipe direction by 45 degrees
    • Short Radius 90°Elbow: Same as LR90 except for the measurement between end of elbow to center line is 1 x NPS
    • Short radius 180° Elbow: Short Radius 180° return bend allows complete reversal of flow

    Applications:
    which are widely used in many highly corrosive and abrasive transmission systems especially for coal fired power plants, steel plants, mining, chemical industry, petro-chemical, polysilicon and metallurgy. The use of Rottech ceramic-lined pipe and fittings is ideal in services that are prone to erosive wear, and where standard pipe and fittings would fail within 24 months or less.

    The following working conditions are some typical medium in which ceramic lined Pipe and elbows have been proved to have
    good performance.

    • Coal powder
    • Silicon powder
    • Fly ash
    • Mining slurry
    • Mining Slag
    • Coal washing
    • Strong acid slurry
    • Paper making Slurry

    Technical Specifications
    Size Range: 1” to 48”
    Pressure Rating: ANSI 150 lb. to ANSI 2,500 lb.
    Max Operating Temperature: 1,200° F
    Max Thermal Shock Ability: 750° F

    HOME COMPANY INFO PRODUCTS SERVICES APPLICATION QUALITY CONTROL NEWS CONTACT US